看不到FLASH請下載FLASH PLAYER,點擊 這里下載
ZR98 SERIES CO
ZR9802 TYPE CO
ZR2001 COMPUTE
ZR126-TYPE HAN
ZR2002 COMPUTE
ZRL2009A COMPU
HANK
HARD CONE
SOFT CONE
看不到FLASH請下載FLASH PLAYER,點擊 這里下載

ZR2006 TYPE PRECISE WINDING MACHINE

    ZR2006 type precise winding machine is the new generation of our company and manufactured on basis of features of advanced cone dyeing machine at home and abroad. We assimilate the excellence of domestic winding machine and technique of digit control overseas. The machine is reasonable in structure and good looking for digit control technique and coated iron plate shell. Every spindle works separately, rotation speed is consistent in every stage for the digit frequency adjustable and CPU control speed technique.
The main motor and the roller motor adopt the separately speed-adjustor control, make the main motor and the roller speed start up, operate, and stop can be application. Compare with other precision winding machine, this machine conquered the yarn mix-up, yarn broke, bad shaping while in the process of start-up, and stop roller the speed too big, make the machine operating, use more conveniently and concisely, nice cone shaping.

The machine is suitable for both hard and soft cone winding of all kinds of filament, especially the hard and soft cone of small filament ,mousseline. cone rigidity HP5 can be less than 15. It prepares for cone dyeing and unwinding in ribbon (cone unwinding speed can reach 800m/min).

      
Show board key software can be made according to needs, adjustment and control; memory is included.

Main specifications and technical parameters:

Spindle no

Single side 24spindles/4sections,(6spindles/section)

Total dynamic guide travel

Max.200mm

Spindle space

300mm

Taking up

Max.750-2000g

Bobbin size

DiameterΦ60(outside diameter)×Φ56(inside diameter)×230(length)mm or collocate for client’s special requirement

Drive mode

Non-interruption single spindle, power 120W, rotation consistency adjusted by CPU and invert

Linear speed

150-400m/min(most feasible speed is 310m/min)

Power

2.2kw/24spindles

Winding rate

1:2.2 1:3.2 1:4.2(client choose one)

Dimensions(mm)

7500L×860W×1500H

Roller speed

Adjust on basis of linear speed

Weight

1200kg/24spindles

Tension

Min.2g suitable for consistent and degressive tension

Note: The products specification and design may change without further notice.

浙江体彩20选5胆拖计算